PAG SUCTION CUP 

 PAPER/FOIL/PLASTIC BAGS/FILM/THIN OBJECTS

       These  cups have an ultra thin edge that creates the vacuum seal by conforming to the shape of the product.  The complete foot pattern to the center of the cup prevents the vacuum from deforming or "puckering'  thin, flexible products.  Cups range from 10 mm to 50 mm in diameter.

GO TO>>      PAG     PATK    PATM  PAYK     

__________________________________________________________________________

PBG 1.5 BELLOW SUCTION CUP

LEVEL COMPENSATION/CURVED SURFACES/FLEXIBLE

            These cups are for curved, corrugated, or lightly textured surfaces.  The single bellow adds additional level compensation for pick and place applications with uneven surfaces.  The inclusive 35 degree rotation of the bellow helps maintain the vacuum seal when lifting thin products that flex.  Cups range from 10 mm to 150 mm in diameter.

GO TO>>      PBG      PBTM      PBTF      PBTK      PBYK      PBTYS

________________________________________________________________

   PCD SUCTION CUP

CD/DVD/WAFER HANDLING

          These ring suction cups are popular in replication and semi-conductor wafer handling applications.  The small edge design minimizes contact with the product. The short stroke minimizes response time and provides stability during transfer in high speed production.  Cups range from 28 mm to 50 mm in diameter.

________________________________________________________________

PCG 2.5 BELLOWS SUCTION CUP

INCREASED COMPENSATION/SOFT TOUCH/FLEXIBLE

             These multiple bellow cups are designed for applications that require additional level compensation, more flexibility, or minimum back pressure for a "soft touch".  The multiple bellow  has a soft sealing edge good for a variety of sensitive applications; such as food packaging, CD/DVD, medical packaging, and highly irregular curved surfaces.  Cups range from 5 mm to 90 mm in diameter.

GO TO>>      PCG      PCTM      PCTF      

________________________________________________________________

ELECTROSTATIC DISSIPATIVE/SOFT TOUCH

         These sponge cups are for small lightweight products where flat surfaces are unavailable for conventional flat cups.  The 20 durometer sponge material easily conforms to the product surface creating an adequate vacuum level for transfer; like BGA or CSP chips.  The cups are available in silicon static dissipative materials.   Cups range from 4 mm to 15 mm in diameter.

GO TO>>         PDTM

________________________________________________________________

PFG FLAT SUCTION CUP

SMOOTH SURFACES/FAST RESPONSE

          These single edge flat cups are for any product with smooth or slightly curved surfaces. The low profile design minimizes evacuation time for fast response.  In general, these cups are suitable for most applications.  Cups range from 1 mm to 200 mm in diameter.  These cups are available in a mark less materials.

GO TO>>      PFG      PFTM      PFTF      PFTK      PFYK      PFTYS

________________________________________________________________

PFG-FSI MATERIAL SUCTION CUP

HIGH TEMPERATURE MATERIAL 

           Details on these PFG flat cups are available in the PFG section of the website.  We felt it was necessary to highlight the cup material and the cup diameters.  These cups are mainly for handling injection molded products or  applications that have higher than normal temperatures.  The FSI material has high resistance to temperature for longer life.  Cups range from 2 mm to 15 mm in diameter.

GO TO>>      PFG      PFTM      PFTF      PFTK      PFYK      PFTYS 

________________________________________________________________ 

PFOG FLAT ANTI-SLIP SUCTION CUP

SMOOTH SURFACE/OIL SURFACES/SHEAR RESISTANT

          The anti-slip flat cups are for pick-and- place applications that require an increased holding force without having to increase the diameter of the cup.  The grooved foot pattern channels the vacuum flow to the cup's outer diameter which increases the shear force by 25% over conventional flat pads. These cups are perfect for high speed press transfer of small to medium sized stamped metal products.  Cups range in diameter from 20 mm to 40 mm.  

GO TO>>      PFOG      PFOTM      PFOTF      PFOTK      PFOYK      PFOTYS

________________________________________________________________

PJG 1.5 BELLOW SUCTION CUP

SHORT STROKE/THIN SEALING EDGE

             The short stroke bellow suction cup has an extra thin sealing edge and shorter stroke versus the traditional bellows for faster response.  The cups are good for corrugated and smooth surfaces.  Cups range from 2 mm to 80 mm in diameter.  Click on the individual options below

GO TO>>      PJG      PJTM      PJTF      PJTK      PJYK      PJTYS

________________________________________________________________

AUTOMOTIVE SHEET METAL AND PLASTICS

          The PKG is a single edge deep cup with a grooved and textured underside to increase frictional and holding forces .  The PKJG is a bellow cup with the same benefits.  The cup assembly is a variety of configurations designed to replace only the cup to minimize operating expenses.  The assembly fixtures are available with optional  built-in check valves for safety and separate blow-off release porting.  The total package adds more control and flexibility in the function of the cup on top of other safety features with CONVUM vacuum generators to create the ultimate vacuum system.

GO TO>>      PKG      PKJG

________________________________________________________________

PNG SUCTION CUP

PACKAGING AUTOMATION

          These suction cups have soft edges, soft durometers, and through-hole pipe connections for case erecting and de-stack systems in the packaging industry.  Each cup is ribbed on the underside to maximize the vacuum flow to increase the holding forces.  The cups range in diameter from 15 mm to 35 mm.

GO TO>>      PNG      PNTM           _______________________________________________

GO TO>>      PRG      PRTK     PRYK      ________________________________________________________________

PUGB FLAT SWIVEL SUCTION CUP

FLAT SWIVEL/30 DEGREE ANGLE/FLEXIBLE

               The single edge swivel cup is for smooth surfaces with slightly angled pick-up positions and products that require rigid support; such as windshields or flexible thin sheet metal.  Typically, lift capacities and break away forces are higher for flat cups which may be necessary for good stability during lift and transfer.  Maintenance costs are minimized by replacing only the cup portion of the assembly.  Cups range from 10 mm to 200 mm in diameter.

GO TO>>      PUG      PUGB      PUTKB      PUYKB      PUTYSB

________________________________________________________________

PWG FLAT OVAL SUCTION CUP 

          These suction cups are for applications when standard round PFG cups are restricted or insufficient clearances are available to secure vacuum for transfer.  The oval or rectangular design allows you to maximize the available space to properly lift the product in high speed automation.

GO TO>>      PWG      PWTK      PWYK     PWTH      PWYH

________________________________________________________________