|
|
|
|
MPS-1 SERIES PRESSURE SENSOR 1 SWITCH OUTPUT AND 1 ANALOG OUTPUT
The MPS-1 sensor has one open NPN or PNP switch output (Output 1) and one analog output (Output 2). The pressure output signal is a 3 turn trimmer that sets the switch point of the output. The hysteresis adjustment is a 3/4 turn trimmer to control the output signal 3-20% below the pressure output signal. The analog output is a 1~5 VDC signal calibrated to the pressure scale of the sensor. |
|
|
|
|
