 |
|
|
MPS-8 10 MM PRESSURE SENSOR 1 SWITCH OUTPUT OR ANALOG OUTPUT 1-5VDC
The MPS-8 sensor is only 10 mm wide with a switch output or analog output capabilities. The MPS-8 can be located near the suction cup to reduce premature signals created by small tubing in the system. The MPS-8 can be used in combination with the MPS-7 series display or as a stand alone unit. The MPS-8 provides a switch output 125mA/30VDC with a fixed Hysteresis. The MPS-8 analog output is 1-5VDC. Analog output is required for use with the MPS-7 display.
|
|
|
|
|
