MPS-2 - SPECIFICATIONS
Specifications |
||
|
Media |
Non lubricated air, non-corrosive gases |
|
|
Pressure port |
N - 1/8" NPT, R - 1/8" BSPT, G - 1/8" G Threads and M5F | |
|
Operating temperature |
32~122° F (0~50° C) |
|
|
Storage temperature |
14~140° F (-10~60° C) |
|
|
Humidity |
35~85% RH |
|
|
Electrical connection |
C: 4-pin M8 PICO connector, or G: 2m grommet open lead |
|
|
Power supply |
10.8~30 VDC, ripple Vp-p 10% max., reverse voltage protection |
|
|
Display |
3-digit 7-segment LED |
|
|
Units of Measure |
V2 – kPa, bar, mmHg, inHg P2/L2 – Mpa, bar, kgf/cm2, PSI R2 – Mpa, bar, kgf/cm2, PSI |
|
|
Display Resolution |
Vacuum
(- V) |
kPa:
0.1, BAR: 0.001, mmHg: 1, inHg: 0.1 Mpa: 0.001, BAR: 0.01, kgf/cm²: 0.01, PSI: 0.1 kPa: 1, BAR: 0.01, kgf/cm²: 0.01, PSI: 0.1 kPa: 0.1, BAR: 0.001, kgf/cm²: 0.001, PSI: 0.1 |
|
Display frequency |
5 Hz |
|
|
Output circuit |
NPN (sinking) or PNP (sourcing) output, open collector transistor | |
|
Switch output |
2 output signals, max 125mA 30v, NPN or PNP, normally open or closed, LED indicator |
|
|
Linear output |
optional Analog output 1-5VDC or current output 4~20mA | |
Output Modes |
Hysteresis or Window Comparator |
|
|
Output Response time |
< 2ms |
|
|
Repeatability |
± 0.2% F.S. |
|
|
Thermal error |
Max. ± 2% F.S. in temperature range 32~122° F (0-50° C) |
|
|
Current consumption |
< 70mm A | |
|
General protection |
IP 65 or IP 40, CE Rating, EMC-EN55011 Class B, EN 50082-1 |
|
|
Insulation resistance |
> 100M ohms at 500VDC |
|
|
Vibration resistance |
10 to 55Hz, 1.5mm, XYZ, 2 hrs. |
|
|
Shock resistance |
10 G, XYZ |
|
|
Material |
Housing: Polycarbonate Pressure port: Zinc die-cast |
|
|
Mass |
1.4 oz. (35g) |
|