MPS-9 PRESSURE SENSOR - SPECIFICATIONS
Specifications |
||
|
Media |
Non lubricated air, non-corrosive gases, compatible with Polycarbonate and zinc |
|
|
Pressure port |
M5F |
|
|
Operating temperature |
32~122° F (0~50° C) |
|
|
Storage temperature |
14~140° F (-10~60° C) |
|
|
Humidity |
35~85% RH |
|
|
Electrical connection |
G: 2m grommet open lead |
|
|
Power supply |
10.8~30 VDC, ripple Vp-p 10% max., reverse voltage protection |
|
|
Display |
3-digit 7-segment LED |
|
|
Units of Measure |
V9 – kPa R9 – Mpa |
|
|
Display Resolution |
Vacuum
(- V) |
kPa:
0.1 kPa: 1 |
|
Display frequency |
5 Hz |
|
|
Output Circuit |
NPN (sinking) or PNP (sourcing) open collector transistor | |
|
Switch Output |
1 switch output, normally open, max 125mA, 30V, NPN or PNP, LED indicator |
|
|
Output Mode |
Hysteresis |
|
|
Output Response time |
< 1ms |
|
|
Repeatability |
± 0.2% F.S. |
|
|
Thermal error |
Max. ± 2% F.S. in temperature range 32~122° F (0-50° C) |
|
|
General protection |
IP 40 |
|
|
Current consumption |
< 70mmA |
|
|
Vibration resistance |
10 to 55Hz, 1.5mm, XYZ, 2 hrs. |
|
|
Shock resistance |
10 G, XYZ |
|
|
Material |
Body: Polycarbonate Pressure port: Aluminum |
|
|
Mass |
1.4 oz. (35g) |
|