MVS-201 PRESSURE SENSOR

               AUTOMATIC BLOW-OFF WITH TIMER

          The MVS-201 is a winning combination with the  MC2, CVR-2, and CVK vacuum generators.  The MVS-201 automatically provides an output signal for the vacuum release blow-off after each vacuum cycle.  The "201" sensor has one output npn or pnp for vacuum confirmation and a control output that interfaces directly  with the blow-off release pilot valve.  With programmable time control features and a special chip driver, the sensor automatically activates the blow-off release when the vacuum signal  from the PLC is discontinued.  This eliminates, THE PREVIOUSLY REQUIRED, PLC output to activate the blow-off release.  This new technology eliminates PLC output requirements by 50% and reduces installation to a simple 4 wire system by wiring the sensor only.  There are 3 modes of operation for various applications.  The output response time of the sensor is less than 2.5 msec.  Peak limit prevention maintenance feature is automatically recorded internally.